| Safety shotpin |
Adopting stainless steel pin to prevent the valve seat out off the valve body due to vibration |
| Valve body design |
Integral structure, firm and reliable |
| Valve seat seal |
Stainless steel seal, safe and reliable |
| Valve spool |
High-performance duplex stainless steel and spherical positioning function to improve sealing performance and service life of the valve |
| Lubricating grease |
Imported grease used between the sealing gasket and adjusting screw to reduce friction and improve sealing performance |
| Material |
304 SS, 316 SS, Monel, Hastelloy C |
| Marked cover |
Green, red, and blue marks for the pressure-leading valve, balance valve, and draining valve respectively |
| Stuffing box filler |
PTFE |
| Working pressure |
32MPa, 42MPa |
| Working temperature |
≦150℃ |
| 環境溫度 |
-30℃ ... +93℃ |
| Communication |
RS485 Modbus RTU mode |
| Baud rate |
19200/9600/4800/2400 bps |
| Tempering temperature |
100 ppm/℃ (0℃ ... 60℃) |
| Ambient temperature& humidity |
0℃ ... 60℃/20% ... 90% RH (non-condensing) |
