Multiple Output Signal Digital Panel Meter
Model:NAC5
Description:
- Can be used as a pressure relay, which can transmit up to four sets
- Can be used to display gas pressure, oil pressure, water pressure or liquid level
- Offers three functions used together or separately as needed: one- to four-stage alarms, 16-bit resolution analog transmission, and/or RS485 digital communication interface
- Figure 1: Front view
- Figure 2: Back view (with one or more than one output signals)
- Responsive after-sales service / Customizable / High quality / One-year warranty
- The image is for reference; the actual product will be based on your custom specifications.
- Read more: 7 Steps to Selecting a Pressure Gauge
Download file
Product Specification
左右尚有資訊
Accuracy | ±0.1% F.S. ±1 digit (DC/Potentiometer/Resistor/PT-100/Load Cell) ±0.2% F.S. ±1 digit (AC) |
---|---|
Display Screen | High-brightness red LED 20.5 mm (0.8") |
Sampling time | 60 cycles/sec |
Display range | -19999 ... 99999 |
Display over-range indication | doFL/-doFL |
Input over range indication | ioFL/-ioFL |
Parameters indication | Push buttons |
Back up memory | EEPROM |
Relay contact | AC 250V/5A DC 30V/7A |
Analog output resolution | 16 bit |
Output communication | Current output: ≦ 10V Voltage output: ≦ 20mA |
Communication | RS485 Modbus RTU mode |
Baud rate | 19200/9600/4800/2400 bps |
Tempering temperature | 100 ppm/℃ (0℃ ... 60℃) |
Ambient temperature& humidity | 0℃ ... 60℃/20% ... 90% RH (non-condensing) |
Power supply | AC/DC 100V ... 240V AC/DC 22V ... 50V |
Power consumption | < 6.5VA |
Polarity indication | Automatic with " - " indication |
Related products