- EtherCAT interface using SDP 5003.2080
- Local pressure display and active temperature compensation
- Digital pressure, temperature and diagnostic data
- Firmware transfer and hot-swap support
- Two RJ45 ports for cable redundancy
HYDRA ultra high purity pressure transducer for liquid chemicals
Model: HYDRA-Sensor (HS)
- Double-diaphragm isolation system
- PFA and mPTFE wetted components
- 4 … 20 mA output, 2-wire system
- 360° transducer rotation after installation
- IP65 or IP67; optional attachable display
- Responsive after-sales service / Customizable
- High quality / One-year warranty
- Product images are for reference only. Final specifications are based on the confirmed order.
Description
WIKA HYDRA-Sensor measures pressure in semiconductor liquid chemical systems and sends a 4 … 20 mA signal for monitoring and control. The double-diaphragm assembly separates the stainless steel transducer from the process medium through PFA and mPTFE wetted components.
The transducer can be rotated 360° after installation. Choose the process connection and electrical termination for the installation. Chemical compatibility and system pressure limits must be checked for the medium, temperature and connection.
Downloads
Related products
Model: WUD-20-E, WUD-25-E, WUD-26-EUltra high purity pressure transducer with display and EtherCAT
Model: HYDRA-Gauge (HG)HYDRA ultra high purity pressure gauge for liquid chemicals
- Double-diaphragm isolation system
- PFA and mPTFE wetted components
- Stainless steel gauge with black Teflon coating
- 360° gauge rotation after installation
- Optional electronic alarm contacts
Model: 432.25.2Flow-through diaphragm pressure gauge for UHP applications
- Flow-through chamber without dead space
- Easy rinsing of the media path
- Helium leak rate ≤ 10⁻⁹ mbar · l/s
- Electropolished case and chamber, Ra ≤ 0.25 μm
- Connections for ultra high purity gas systems
Model: 432.10, 432.15Mini diaphragm pressure gauge for UHP applications
- Compact diaphragm design for limited installation space
- Low internal volume helps reduce particle trapping
- Helium leak rate ≤ 10⁻⁹ mbar · l/s
- Electropolished measuring chamber and diaphragm surface, Ra < 0.25 μm
- 316L process connection with a metal seal and orbital-welded measuring chamber